Oki B8300 Uživatelský manuál stáhnout pdf (Strana 80)

79 — Saddle stitch finisher

SADDLE STITCH FINISHER

The saddle stitch finisher can automatically place two staples for centreline binding of prints and fold

them along the centreline. An optional hole punching unit is available for installation into the finisher.

Part names

● Do not press on the saddle stitch finisher (particularly the offset tray).

● Be aware that the offset tray moves up and down during printing. Take care not to obstruct the tray.

● Check the correct configuration requirement for the installation of the saddle stitch finisher. Certain

configurations will not work.

Specifications

Name Saddle stitch finisher

Number of trays Two

Paper output Print face down

Tray system Upper tray: offset tray, Lower tray: saddle stitch tray

Tray capacity

Upper tray: Non-stapling: Max. 1,000 sheets for A4 or 8½

x 11 or smaller sizes (80 g/m

or 20

lb), max. 500 sheets for 8½

x 13 or B4 or larger sizes (80 g/m

or 20 lb) Stapling: Max. 30

stapled sets and max. 1,000 sheets for A4 or 8½

x 11 or smaller sizes (80 g/m

or 20 lb), max.

30 stapled sets and max. 500 sheets for 8½

x 13 or B4 or larger sizes (80 g/m

or 20 lb)

Lower tray: Stapled print capacity is (6-10) sheets x 10 sets or (1-5) sheets x 20 sets.

Paper size Upper tray: 11

x 17, 8½ x 14, 8½ x 13, 8½ x 11, 8½ x 11R, 7¼ x 10½, 5½ x 8½R, A3, B4, A4,

A4R, B5, B5R, A5R Lower tray: max. 11

x 17, 8½ x 11R, A3, B4, A4R

Paper weight

Upper tray: 60 to 205 g/m

or 16 to 54 lb

Lower tray: 64 to 80 g/m

or 17 to 34 lb

Paper types Upper tray: plain paper, thick paper

Lower tray: plain paper only

Tray full detection Provided in both trays

Offset function Upper tray only

Paper sizes for stapling 11"

x 17", 8½" x 14", 8½" x 13", 8½" x 11", 8½" x 11"R, A3, B4, A4, A4R, B5, and B5R

Lower tray:11"

x 17", 8½" x 11"R, A3, B4, and A4R

Stapling capacity

A4 or 8½"

x 11" or smaller size: 50 sheets*(80 g/m

or 20 lb)

8½"

x 14" or B4 or larger size: 25 sheets*(80 g/m

or 20 lb)

*Up to two sheets of 128 g/m

or 34 lb paper can be included as covers

Staples Upper tray: Single staple can be placed in the top left or lower left corners or two staples can be

centred on the left side

Lower tray: 120 mm (4

") pitch from the centre of paper

Power supply Requires the installation of an optional power supply unit

Dimensions

718 mm (W)

x 603 mm (D) x 1000 mm (H) (28

" (W) x 23¾" (D) x 39

" (H))

Weight Approx. 39 kg (86 lb)

Name Punch module

Number of holes/hole diameter

Three holes: 6.5 mm or

Specifications are subject to change without notice

Stapler compiler

Paper to be stapled

is stacked temporarily

Top cover

Open for misfeed removal

Offset tray

Output which is stapled

or offset will be

delivered to this tray

Stapler section

Open the front cover

and pull out this section

to replace the staple cartridge

or to remove jammed staples

Saddle stitch tray

Saddle stitched output

is delivered here

Front cover

Open the front cover and pull out this

section for staple cartridge replacement

or to remove jammed staples

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 94 95

Komentáře k této Příručce

Žádné komentáře

Oki B8300 Uživatelský manuál Strana 80

Komentáře k této Příručce

Související produkty a manuály pro Tiskárny Oki B8300